Keyword

Watt per Square Meter

297 record(s)
 
Type of resources
Topics
Keywords
Contact for the resource
Provided by
Years
Update frequencies
status
From 1 - 10 / 297
  • Categories    

    This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in a pastoral area using eddy covariance techniques.<br /><br />The flux station site is located within an area of dryland agriculture. The surrounding area is dominated by broadacre farming practices. The vegetation cover is predominantly pasture. Elevation of the site is close to 152m and mean annual precipitation at a nearby Bureau of Meteorology site measures 650mm. Maximum temperatures range from 12.3°C (in July) to 29.7°C (in February), while minimum temperatures range from 10.4°C (in July) to 26.8°C (in February).<br /><br />The instrument mast is 4 meters tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall and net radiation are measured. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.<br /><br />This data is also available at http://data.ozflux.org.au .

  • Categories    

    This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The site was identified as tropical pasture dominated by species <em>Chamaecrista rotundifolia</em> (Round-leaf cassia cv. Wynn), <em>Digitaria milijiana</em> (Jarra grass) and <em>Aristida sp.</em> standing at approximately 0.3m tall. The soil at the site was a mixture of red kandosol and deep sand. Elevation of the site was close to 70m and mean annual precipitation at a nearby Bureau of Meteorology site was 1250mm. Maximum temperatures ranged from 37.5°C (in October) to 31.2°C (in June), while minimum temperatures ranged from 12.6°C (in July) to 23.8°C (in January). Maximum temperatures varied on a seasonal basis between 6.3°C while minimum temperatures varied by 11.2°C. <br /> <br /> The instrument mast was 15 meters tall. Heat, water vapour and carbon dioxide measurements were taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation were measured. <br />Ancillary measurements taken at the site included LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, N and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out across the transect in September 2008. <br /> The site was destroyed by fire in September 2013. <br />

  • Categories    

    This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The site was identified as tropical pasture dominated by species <em>Chamaecrista rotundifolia</em> (Round-leaf cassia cv. Wynn), <em>Digitaria milijiana</em> (Jarra grass) and <em>Aristida sp.</em> standing at approximately 0.3m tall. The soil at the site was a mixture of red kandosol and deep sand. Elevation of the site was close to 70m and mean annual precipitation at a nearby Bureau of Meteorology site was 1250mm. Maximum temperatures ranged from 37.5°C (in October) to 31.2°C (in June), while minimum temperatures ranged from 12.6°C (in July) to 23.8°C (in January). Maximum temperatures varied on a seasonal basis between 6.3°C while minimum temperatures varied by 11.2°C. <br /> <br /> The instrument mast was 15 meters tall. Heat, water vapour and carbon dioxide measurements were taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation were measured. <br />Ancillary measurements taken at the site included LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, N and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out across the transect in September 2008. <br /> The site was destroyed by fire in September 2013. <br />

  • Categories    

    This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.5.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The site was identified as tropical pasture dominated by species <em>Chamaecrista rotundifolia</em> (Round-leaf cassia cv. Wynn), <em>Digitaria milijiana</em> (Jarra grass) and <em>Aristida sp.</em> standing at approximately 0.3m tall. The soil at the site was a mixture of red kandosol and deep sand. Elevation of the site was close to 70m and mean annual precipitation at a nearby Bureau of Meteorology site was 1250mm. Maximum temperatures ranged from 37.5°C (in October) to 31.2°C (in June), while minimum temperatures ranged from 12.6°C (in July) to 23.8°C (in January). Maximum temperatures varied on a seasonal basis between 6.3°C while minimum temperatures varied by 11.2°C. <br /> <br /> The instrument mast was 15 meters tall. Heat, water vapour and carbon dioxide measurements were taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation were measured. <br />Ancillary measurements taken at the site included LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, N and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out across the transect in September 2008. <br /> The site was destroyed by fire in September 2013. <br />

  • Categories    

    This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The flux station is located at Rosebank Station, approximately 11 km south-east of Longreach in Queensland. The site is arid tussock grassland with a variety of grass species including <em>Astrebla lappacea</em> and <em>Astrebla squarrosa</em> over black vertosol soil that supports sheep and beef cattle grazing. Traditional owners at this site are the Iningai people. For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/mitchell-grass-rangeland-supersite/ .<br /><br />

  • Categories    

    <br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by <em>Banksia</em> spp. mainly <em>Banksia menziesii</em>, <em>Banksia attenuata</em>, and <em>Banksia grandis</em> with a height of around 7&nbsp;m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10&nbsp;m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10&nbsp;%; and in summer these generally hold less than 2&nbsp;% moisture. The water table is at about 8.5&nbsp;m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14.8&nbsp;m tall, with the eddy covariance instruments mounted at 14.8&nbsp;m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500&nbsp;m east and west of the tower. <br/> <br/>

  • Categories    

    <br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The flux station is located at Rosebank Station, approximately 11&nbsp;km south-east of Longreach in Queensland. The site is arid tussock grassland with a variety of grass species including <em>Astrebla lappacea</em> and <em>Astrebla squarrosa</em> over black vertosol soil that supports sheep and beef cattle grazing. Traditional owners at this site are the Iningai people.

  • Categories    

    <br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by <em>Banksia</em> spp. mainly <em>Banksia menziesii</em>, <em>Banksia attenuata</em>, and <em>Banksia grandis</em> with a height of around 7&nbsp;m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10&nbsp;m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10&nbsp;%; and in summer these generally hold less than 2&nbsp;% moisture. The water table is at about 8.5&nbsp;m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14.8&nbsp;m tall, with the eddy covariance instruments mounted at 14.8&nbsp;m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500&nbsp;m east and west of the tower. <br/> <br/>

  • Categories    

    <br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by <em>Banksia</em> spp. mainly <em>Banksia menziesii</em>, <em>Banksia attenuata</em>, and <em>Banksia grandis</em> with a height of around 7&nbsp;m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10&nbsp;m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10&nbsp;%; and in summer these generally hold less than 2&nbsp;% moisture. The water table is at about 8.5&nbsp;m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14.8&nbsp;m tall, with the eddy covariance instruments mounted at 14.8&nbsp;m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500&nbsp;m east and west of the tower. <br/> <br/>

  • Categories    

    <br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by <em>Banksia</em> spp. mainly <em>Banksia menziesii</em>, <em>Banksia attenuata</em>, and <em>Banksia grandis</em> with a height of around 7&nbsp;m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10&nbsp;m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10&nbsp;%; and in summer these generally hold less than 2&nbsp;% moisture. The water table is at about 8.5&nbsp;m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14.8&nbsp;m tall, with the eddy covariance instruments mounted at 14.8&nbsp;m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500&nbsp;m east and west of the tower. <br/> <br/>