Multi spectral values
Type of resources
Contact for the resource
This dataset contains UAV multispectral imagery collected as part of a field trial to test the Unmanned Aerial System to be used for the TERN Drone project. The UAS platform is DJI Matrice 300 RTK with 2 sensors: Zenmuse P1 (35 mm) RGB mapping camera and Micasense RedEdge-MX (5-band multispectral sensor). P1 imagery were geo-referenced using the onboard GNSS in M300 and the D-RTK 2 Mobile Station. P1 Camera positions were post-processed using <a href="https://www.ga.gov.au/scientific-topics/positioning-navigation/geodesy/auspos">AUSPOS</a>. The flights took place between 14:58 and 03:08 at a height of 80m with a flying speed set to 5 m/s. Forward and side overlaps of photographs were set to 80%. <br><br> Micasense multispectral sensor positions were interpolated using P1, following which a standard workflow was followed in Agisoft Metashape to generate this orthomosaic (resolution 5 cm). Reflectance calibration was performed using captures of the MicaSense Calibration Panel taken before the flight. The orthomosaic raster has the relative reflectance (no unit) for the 5 bands (B, G, R, RedEdge, NIR). This cloud optimised (COG) GeoTIFF was created using rio command line interface. The coordinate reference system of the COG is EPSG 7855 - GDA2020 MGA Zone 55. <br><br> In the raw data RedEdge-MX image file suffixes correspond to bands like so - 1: Blue, 2: Green, 3: Red, 4: NIR, 5: Red Edge. However, in the processed Orthomoasic GeoTIFF, the bands are ordered in the wavelength order (Blue, Green, Red, Red Edge, NIR).
This dataset contains Unmanned Aircraft System (UAS) multispectral, pansharpened and long-wave infrared (LWIR) orthomosaics of the Samford Ecological Research Facility (SERF), Queensland University of Technology. SERF is located in the Samford Valley, west of Brisbane, Australia and is the usual place for flight testing and evaluation of new equipment. The QUT's Research Engineering Facility team operated DJI Matrice 300RTK (M300) with latest MicaSense Altum-PT (5-band multispectral sensor, LWIR, panchromatic channels and downlight sensor). The images were geo-referenced using the onboard GNSS in M300 and the D-RTK 2 base station and also georectified with 5 ground control points collected by Emlid Reach RS GNSS receivers. In the processing workflow in Agisoft Metashape, the multispectral orthomosaics were orthorectified and pan-sharpened. Dense point clouds were used to generate multispectral (GSD 3.4 cm/px), panchromatic and multispectral pansharpened (GSD 1.6 cm/pixel) and LWIR (GSD 21 cm/pixel) orthomosaics.