<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br><em>Eucalyptus obliqua</em> forests dominate the vegetation below 650&nbsp;m where they exist as fire-maintained communities. On fertile soils these forests attain mature heights in excess of 55&nbsp;m: the tallest <em>E. obliqua</em> reaches a height of 90&nbsp;m. The flux station is installed in a stand of tall, mixed-aged <em>E. obliqua</em> forest (77 and >250 years-old) with a rainforest understorey and a dense man-fern (<em>Dicksonia antarctica</em>) ground-layer, on a small flat of elevation 100&nbsp;m adjacent to the Huon River. The understorey vegetation progresses from wet sclerophyll (dominated by <em>Pomaderris apatala</em> and <em>Acacia dealbata</em>) to rainforest (dominated by <em>Nothofagus cunninghamii</em>, <em>Atherosperma moschatum</em>, <em>Eucryphia lucida</em> and <em>Phyllocladus aspleniifolius</em>) with increasing time intervals between fire events. The site supports prodigous quantities of coarse woody debris as is characteristic of these fire-maintained eucalypt forests on fertile sites in southern Tasmania. The soil at the flux site is derived from Permian mudstone and has a gradational profile with a dark brown organic clayey silt topsoil overlying a yellow brown clay. The climate is classified as temperate with a mild summer and no dry season. Mean annual precipitation is 1700&nbsp;mm with a relatively uniform seasonal distribution. Summer temperatures peak in January (8.4&nbsp;°C to 19.2&nbsp;°C) with winter temperatures reaching their lowest in July (2.6&nbsp;°C to 8.4&nbsp;°C).</br> <br>The instruments are mounted at the top of an 80&nbsp;m tall guyed steel lattice tower. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation. An open-path gas analyser (EC150) was replaced by a closed-path gas analyser (EC155) at the end of January 2015. Soil moisture content is measured using time domain reflectometry. Soil heat fluxes and temperature are also measured. Micro-meteorology (CO₂, H₂O, energy fluxes) and meteorology (temperature, humidity, wind speed and direction, rainfall) were measured from 2013 to late 2016, but the dataset is incomplete due to ongoing problems since changing the open-path IRGA to a closed path system (CPEC200) during 2015. Soil data (moisture, heat flux, temperature) are complete for the time period.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Ti Tree East site was established in July 2012 and is managed by the University of Technology Sydney. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. However, the east side has not been stocked in over three years. The site is a mosaic of the primary semi-arid biomes of central Australia: grassy mulga woodland and <em>Corymbia/Triodia</em> savanna.The woodland is characterised by a mulga (<em>Acacia aneura</em>) canopy, which is 4.85&nbsp;m tall on average. The soil is red sand overlying an 8&nbsp;m deep water table. Elevation of the site is 553&nbsp;m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (30&nbsp;km to the south) Bureau of Meteorology station is 305.9&nbsp;mm but ranges between 100&nbsp;mm in 2009 to 750&nbsp;mm in 2010. Predominant wind directions are from the southeast and east.</br> <br>The instrument mast is 10&nbsp;m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 9.81&nbsp;m. Supplementary measurements above the canopy include temperature and humidity (9.81&nbsp;m), windspeed and wind direction (8.28&nbsp;m), downwelling and upwelling shortwave and longwave radiation (9.9&nbsp;m). Precipitation is monitored in the savanna (2.5&nbsp;m). Supplementary measurements within and below the canopy include barometric pressure (2&nbsp;m). Below ground soil measurements are made beneath Triodia, mulga and grassy understorey and include ground heat flux (0.08&nbsp;m), soil temperature (0.02&nbsp;m - 0.06&nbsp;m) and soil moisture (0 - 0.1&nbsp;m, 0.1 - 0.3&nbsp;m, 0.6 - 0.8&nbsp;m and 1.0 - 1.2&nbsp;m).</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The site is located on a low lying plain dominated by Mitchell Grass (<em>Astrebla</em> spp.). Elevation of the site is close to 250&nbsp;m and mean annual precipitation at a nearby Bureau of Meteorology site is 640&nbsp;mm. Maximum temperatures range from 28.4&nbsp;°C (in June/ July) to 39.1&nbsp;°C (in December), while minimum temperatures range from 11.2&nbsp;°C (in July) to 24.4&nbsp;°C (in December).</br> <br>The instrument mast is 5&nbsp;m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall and net radiation are measured. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.</br> <br>Ancillary measurements taken at the site include LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, nitrogen and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out at the site in September 2008. Biomass harvest measured: mean live biomass 0.00&nbsp;gm^-2 (standard error: 0.00), mean standing dead biomass 163.42&nbsp;gm^-2 (standard error: 16.73), mean litter biomass 148.99&nbsp;gm^-2 (standard error: 21.32), total mean biomass 312.40&nbsp;gm^-2 (standard error: 30.80). Soil consists of: clay 14.47%, silt 51.23%, sand 34.30%.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The site is located on a low lying plain dominated by Mitchell Grass (<em>Astrebla</em> spp.). Elevation of the site is close to 250&nbsp;m and mean annual precipitation at a nearby Bureau of Meteorology site is 640&nbsp;mm. Maximum temperatures range from 28.4&nbsp;°C (in June/ July) to 39.1&nbsp;°C (in December), while minimum temperatures range from 11.2&nbsp;°C (in July) to 24.4&nbsp;°C (in December).</br> <br>The instrument mast is 5&nbsp;m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall and net radiation are measured. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.</br> <br>Ancillary measurements taken at the site include LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, nitrogen and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out at the site in September 2008. Biomass harvest measured: mean live biomass 0.00&nbsp;gm^-2 (standard error: 0.00), mean standing dead biomass 163.42&nbsp;gm^-2 (standard error: 16.73), mean litter biomass 148.99&nbsp;gm^-2 (standard error: 21.32), total mean biomass 312.40&nbsp;gm^-2 (standard error: 30.80). Soil consists of: clay 14.47%, silt 51.23%, sand 34.30%.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The forest is classed as a tall, wet sclerophyll forest, and the dominant <em>Eucalyptus Regnans</em> or mountain ash trees have an average canopy height of 75&nbsp;m. The site contains a chronosequence of (20, 80 and 300) stand ages that were established during fires occurring over the last 300 years. The area is assigned the IUCN Category II (National Parks) of the United Nations’ list of National Parks and protected areas, which means the park is primarily managed for ecosystem conservation. The catchment area is dominated by mountain ash, the world’s tallest flowering plant (angiosperm). Trees can reach heights of more than 90&nbsp;m in areas with high rainfall and fertile soil. Mountain ash forests are confined to the cool mountain regions with elevations ranging from 460 to 1100&nbsp;m and average rainfalls of 1100 to 2000&nbsp;mm/y. These trees are well distributed throughout Victoria’s Central Highlands including the Otway Ranges and Strzlecki Ranges; they are also found in Tasmania. The catchment area contains a portion of the Mt. Disappointment range, the Divide and the headwaters of Wallaby Creek and Silver Creek, and much of the slopes are characterised as flat to moderate.</br> <br>The station itself is located within an old growth stand with individual trees as old as 300 years. Below the dominant canopy lies a temperate rainforest understorey consisting of <em>Pomaderris aspera</em> and <em>Olearia argophylla</em> species, which are 10 to 18&nbsp;m tall. The lower layers of vegetation are dominated by tree ferns (<em>Cyathea australis</em> and <em>Dicksonia antartica</em>) and extensive tracts of rosette and rhizonic ferns (<em>Polystichum proliferum</em> and <em>Blechnum wattsii</em>) as well as acacia trees. The elevation is approximately 720&nbsp;m. The major soil type within the forest is krasnozemic soils, which are friable red/brown soils, with high amounts of organic matter in the upper 20 to 30&nbsp;cm. However, the composition of krasnozemic soils is not homogenous, but rather varies with altitude. Grey-yellow podsolised soils can be found at lower altitudes, while krasnozemic loams is characteristic of the higher altitudes of the Kinglake and of the Hume Plateau. The clay content of these soils increases with depth until at least 200&nbsp;cm deep, where after a transition soils contain rock fragments. The climate of the study area is classified as a cool, temperate zone, with the highest temperatures occurring during the summer months of December – February (13.8 to 22.5&nbsp;°C), whilst the coolest temperatures are experienced in May and August (4.7 to 9.2&nbsp;°C). Average annual precipitation is 1209&nbsp;mm, with a maximum rainfall occurring in June (Ashton, 2000). The study site experiences foggy conditions after sunset during autumn and winter.</br> <br>The original station had a main mast at 110&nbsp;m. This station was destroyed in February 2009 by bushfires. A replacement station was established in March 2010 and started recording in May 2010. The mast sat at a height of 5&nbsp;m. The post-fire instrumentation was not as diverse as the pre-fire instrumentation.</br>

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in dry sclerophyll forest using eddy covariance techniques.<br /><br /> The Wombat State Forest site is a secondary re-growth forest that was last harvested in 1980. Dominant tree species are <em>Eucalyptus obliqua</em> (messmate stringybark), <em>Eucalyptus radiata</em> (narrow leaf peppermint) and <em>Eucalyptus rubida</em> (candlebark) with an average canopy height of 25m. The understorey consists mainly of patchy grasses and the soil is a silty-clay overlying clay. The forest is managed by the Department of Sustainability and Environment and management includes selective harvesting and prescribed burning regimes. The climate of the study area is classified as cool-temperate to Mediterranean zone with cold and wet winters (May-Aug) and warm and dry summers (Dec-Feb) with a temperature range: 1-30 °C and mean annual air temperature (2001-2012): 12.1°C. Annual rainfall is approximately 871 mm (142 year long-term average). Coherent automated measurements of soil greenhouse gas fluxes (CO2, CH4 and N2O) were collected using a trailer-mounted mobile laboratory – Fourier transform infra-red (FTIR) spectrometer from 2010 to 2016. Measurement height was 30m but increased to 33m from January 2017<br /><br />This data is also available at http://data.ozflux.org.au .

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The site is situated within a wetland that flooded seasonally. The principal vegetation is <em>Oryza rufipogon</em>, <em>Pseudoraphis spinescens</em> and <em>Eleocharis dulcis</em>. The elevation is approximately 4&nbsp;m, with a neighbouring Bureau of Meteorology station recording 1411&nbsp;mm mean annual precipitation. Maximum temperatures range from 31.3&nbsp;°C (in June and July) to 35.6&nbsp;°C (in October), while minimum temperatures range from 14.9&nbsp;°C (in July) to 23.9&nbsp;°C (in December and February). Maximum temperatures vary on a seasonal basis by approximately 4.3&nbsp;°C and minimum temperatures by 9.0&nbsp;°C.<br /><br /> The instrument mast is 15&nbsp;m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation are measured above the canopy. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry. Ancillary measurements being taken at the site include LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, nitrogen and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne-based remote sensing (Lidar and hyperspectral measurements) was carried out across the site in September 2008.

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> Fletcherview Tropical Rangeland SuperSite was established in 2021 at James Cook University’s Fletcherview Research Station, a fully operational outback cattle station located 50&nbsp;km west of Townsville, Queensland. The site is used for cattle grazing and is characterised by tall open savanna. The vegetation is dominated by native grasses such as blackspear and kangaroo grasses, as well as introduced species like buffel grass, signal grass and leucaena. Fletcherview typically experiences a dry and wet season, with most rainfall occurring between January and April.<br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux</a>.<br /> <br />The Ti Tree East site was established in July 2012 and is managed by the University of Technology Sydney. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. However, the east side has not been stocked in over three years. The site is a mosaic of the primary semi-arid biomes of central Australia: grassy mulga woodland and Corymbia/Triodia savanna.The woodland is characterised by a mulga (Acacia aneura) canopy, which is 4.85 m tall on average. The soil is red sand overlying an 8 m deep water table. Elevation of the site is 553 m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (30 km to the south) Bureau of Meteorology station is 305.9 mm but ranges between 100 mm in 2009 to 750 mm in 2010. Predominant wind directions are from the southeast and east. The instrument mast is 10 m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 9.81m. Supplementary measurements above the canopy include temperature and humidity (9.81 m), windspeed and wind direction (8.28 m), downwelling and upwelling shortwave and longwave radiation (9.9 m). Precipitation is monitored in the savanna (2.5m). Supplementary measurements within and below the canopy include barometric pressure (2 m). Below ground soil measurements are made beneath Triodia, mulga and grassy understorey and include ground heat flux (0.08 m), soil temperature (0.02 m – 0.06 m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). <br />For additional site information, see http://ozflux.org.au/siteOfTheMonth/2020-09Alice-and-TiTree/2020-09Alice-and-TiTree.html . <br /><br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> Located in a 5 square kilometre block of relatively uniform open-forest savanna, the site is representative of high rainfall, frequently burnt tropical savanna. <br /><br />Tropical savanna in Australia occupies 1.9 million square km across the north and given the extent of this biome, understanding biogeochemical cycles, impacts of fire on sequestration, vegetation and fauna is a national priority. In the NT, savanna ecosystems are largely intact in terms of tree cover, with only modest levels of land use change. Despite this, there is evidence of a loss of biodiversity, most likely due to shifts in fire regimes and a loss of patchiness in the landscape. Approximately 40% of the savanna burn every year and understanding fire impacts on fauna and flora is essential for effective land management. <br /><br />