The data set contains information on air temperature and relative humidity at heights 1m and 3m from three sensors at each height and a global solar radiation at 3m, mean wind speed and gust speed at 3m measured from the Bowen ratio energy balance Flux tower site, Great Western Woodlands Site.

Data on weather conditions at the Great Western Woodlands site collected between 2012 - 2016. Data includes half-hourly records of radiation and net radiation at 3 m (2012) and 36 m (2013 - 2016), mean wind speed and wind direction at 3 m (2012) and 36 m (2013 - 2016), air temperature and relative humidity at 3 m (2012) and 36 m (2013 - 2016), atmospheric pressure at 3 m (2012) and 36 m (2013 - 2016), ground heat flux at -8cm, and rainfall at 0.5m

Data on weather conditions at the Robson Creek Rainforest site collected between 2010 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

Data on weather conditions at the Warra Tall Eucalypt site collected between 2004 - 2012. Data includes daily maximum and minimum temperatures, wind speed, wind direction, rainfall and humidity.

Data on weather conditions at the Daintree Rainforest, Cow Bay site collected between 2008 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

Data on weather conditions at the Daintree Rainforest, Cape Tribulation site collected between 2006 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The Tumbarumba flux station is located in the Bago State Forest in south eastern New South Wales. It was established in 2000 and is managed by CSIRO Marine and Atmospheric Research. The forest is classified as wet sclerophyll, the dominant species is Eucalyptus delegatensis, and average tree height is 40m. Elevation of the site is 1200m and mean annual precipitation is 1000mm. The Bago and Maragle State Forests are adjacent to the south west slopes of southern New South Wales and the 48,400 ha of native forest have been managed for wood production for over 100 years. The instrument mast is 70m tall. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation. Profiles of temperature, humidity and CO2 are measured at seven levels within the canopy. Soil moisture content is measured using Time Domain reflectometry, while soil heat fluxes and temperature are also measured. Hyper-spectral radiometric measurements are being used to determine canopy leaf-level properties. The Tumbarumba flux station is supported by TERN and the DCCEE through the ACCSP. <br />For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/tumbarumba-wet-eucalypt-supersite/. <br /><br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The Collie flux station was located approximately 10&nbsp;km southeast of Collie, near Perth, Western Australia. It was established in August 2017 and stopped measuring in November 2019. </br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br /> The flux station was established in 2017 in Wandoo Woodland, which is surrounded by broadacre farming. About 80% of the overstorey cover is <em>Eucalyptus accedens</em>. Climate information comes from the nearby Pingelly BOM AWS station 010626 (1991 to 2016) and shows mean annual precipitation is approximately 445&nbsp;mm with highest rainfall in June and July of 81&nbsp;mm each month. Maximum and minimum annual rainfall is 775 and 217&nbsp;mm, respectively. Maximum temperatures range from 31.9&nbsp;°C (in Jan) to 15.4&nbsp;°C (in July), while minimum temperatures range from 5.5&nbsp;°C (in July) to 16.0&nbsp;°C (in Feb). The Noongar people are the traditional owners at Boyagin. <br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The Collie flux station was located approximately 10&nbsp;km southeast of Collie, near Perth, Western Australia. It was established in August 2017 and stopped measuring in November 2019. </br>