Data on weather conditions at the Daintree Rainforest, Cape Tribulation site collected between 2006 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

Data on weather conditions at the Robson Creek Rainforest site collected between 2010 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

Data on weather conditions at the Daintree Rainforest, Cow Bay site collected between 2008 - 2014. Weather station data includes daily records of air temperature, wind speed, solar radiation, relative humidity and rainfall.

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The Cow Bay flux station was established in December 2008 and managed by James Cook University. The forest is classified as complex mesophyll vine forest, there are 94 species in the core 1Ha, and average tree height is 22m. Elevation of the site is 90m and mean annual precipitation is 3935mm. The Daintree Rainforest is one of the most biodiverse forests in Australia.The instruments are mounted on a walk-up tourist tower at 35m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.The early years 2009 - 12 had several data gaps. Shadowing of the radiometric equipment continues to cause artifacts on the radiometers - these can be seen as reduction in downwelling radiation with solar inclination. The site is part of the FNQ Rainforest SuperSite - associated with the Daintree node, which is part of the TERN Australian SuperSite Network (ASN). <br/> For additional site information, see https://supersites.tern.org.au/supersites/fnqr-daintree .<br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.18) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Robson Creek site is part of the Far North Queensland (FNQ) Rainforest Site along with affiliated monitoring sites at Cape Tribulation (Daintree Rainforest Observatory) and Cow Bay (Daintree Discovery Centre). The flux station is located at the foothills of the Lamb Range, part of the Wet Tropics World Heritage Area, and north-west of a 25&nbsp;ha census plot established by CSIRO in 2012.</br> <br>The forest is classified as Regional Ecosystem (RE) 7.3.36a, complex mesophyll vine forest (Queensland Government, 2006). There are 211 species in the adjacent 25&nbsp;ha plot, and average tree height is 28&nbsp;m, ranging from 23 to 44&nbsp;m. Elevation of the site is 711&nbsp;m and mean annual precipitation is 2000&nbsp;mm. The upland rainforests of the Atherton Tablelands are some of the most biodiverse and carbon dense forests in Australia. The landform of the 25&nbsp;ha plot which is in the dominant wind direction from the station is moderately inclined with a low relief, a 30&nbsp;m high ridge running north/south through the middle of the plot and a 40&nbsp;m high ridge running north/south on the eastern edge of the plot.</br> <br>The instruments are mounted on a free standing station at 40&nbsp;m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.</br> <br>Note: Level 3 data for 2015 - 2018 were updated in 2018 correcting a rainfall issue in 2015 and a wind direction issue 2016 - 2018. A data gap from 2019-02-14 to 2019-02-21 was due to a major power supply failure.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Robson Creek site is part of the Far North Queensland (FNQ) Rainforest Site along with affiliated monitoring sites at Cape Tribulation (Daintree Rainforest Observatory) and Cow Bay (Daintree Discovery Centre). The flux station is located at the foothills of the Lamb Range, part of the Wet Tropics World Heritage Area, and north-west of a 25&nbsp;ha census plot established by CSIRO in 2012.</br> <br>The forest is classified as Regional Ecosystem (RE) 7.3.36a, complex mesophyll vine forest (Queensland Government, 2006). There are 211 species in the adjacent 25&nbsp;ha plot, and average tree height is 28&nbsp;m, ranging from 23 to 44&nbsp;m. Elevation of the site is 711&nbsp;m and mean annual precipitation is 2000&nbsp;mm. The upland rainforests of the Atherton Tablelands are some of the most biodiverse and carbon dense forests in Australia. The landform of the 25&nbsp;ha plot which is in the dominant wind direction from the station is moderately inclined with a low relief, a 30&nbsp;m high ridge running north/south through the middle of the plot and a 40&nbsp;m high ridge running north/south on the eastern edge of the plot.</br> <br>The instruments are mounted on a free standing station at 40&nbsp;m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.</br> <br>Note: Level 3 data for 2015 - 2018 were updated in 2018 correcting a rainfall issue in 2015 and a wind direction issue 2016 - 2018. A data gap from 2019-02-14 to 2019-02-21 was due to a major power supply failure.</br>

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The Robson Creek site is part of the FNQ Rainforest Site along with affiliated monitoring sites at Cape Tribulation (Daintree Rainforest Observatory) and Cow Bay (Daintree Discovery Centre). The flux station is located at the foothills of the Lamb Range, part of the Wet Tropics World Heritage Area, and north-west of a 25 hectare census plot established by CSIRO in 2012. <br /> The forest is classified as Regional Ecosystem (RE) 7.3.36a, complex mesophyll vine forest (Queensland Government 2006). There are 211 species in the adjacent 25ha plot, and average tree height is 28m, ranging from 23 to 44 m. Elevation of the site is 711m and mean annual precipitation is 2000mm. The upland rainforests of the Atherton Tablelands are some of the most biodiverse and carbon dense forests in Australia. The landform of the 25ha plot which is in the dominant wind direction from the station is moderately inclined with a low relief, a 30 m high ridge running north/south through the middle of the plot and a 40 m high ridge running north/south on the eastern edge of the plot. <br /><br /> The instruments are mounted on a free standing station at 40m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation. <br /><br />Note: Level 3 data for 2015 - 2018 were updated in 2018 correcting a rainfall issue in 2015 and a wind direction issue 2016 - 2018. A data gap from 2019-02-14 - 2019-02-21 was due to a major power supply failure.

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in lowland tropical rainforest at the Daintree Discovery Centre near Cow Bay in Far North Queensland, using eddy covariance techniques. <br /> <br /> The Cow Bay flux station was established in December 2008 and managed by James Cook University. The forest is classified as complex mesophyll vine forest, there are 94 species in the core 1Ha, and average tree height is 22m. Elevation of the site is 90m and mean annual precipitation is 3935mm. The Daintree Rainforest is one of the most biodiverse forests in Australia.The instruments are mounted on a walk-up tourist tower at 35m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.The early years 2009 - 12 had several data gaps. Shadowing of the radiometric equipment continues to cause artifacts on the radiometers - these can be seen as reduction in downwelling radiation with solar inclination. The site is part of the FNQ Rainforest SuperSite - associated with the Daintree node, which is part of the TERN Australian SuperSite Network (ASN). <br/> For additional site information, see https://supersites.tern.org.au/supersites/fnqr-daintree .<br /> This data is also available at http://data.ozflux.org.au .

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The Cape Tribulation flux station was located in the land that is adjacent to the Daintree National Park which is part of the Wet Tropics World Heritage Area (WTWHA). The site is flanked to the west by coastal ranges rising to more than 1400&nbsp;m and to the east by the Coral Sea. The red clay loam podzolic soils are of metamorphic origin and have good drainage characteristics. The metamorphic rocks grade into granite boulders along Thompson Creek which runs along the northern boundary of the site. The crane site itself is gently sloping but the fetch area makes the site one of very complex terrain. The forest is classed as complex mesophyll vine forest (type 1a) and has an average canopy height of 25m. The dominant canopy trees belong to the <i>Apocynaceae</i>, <i>Arecaceae</i>, <i>Euphorbiaceae</i>, <i>Lauraceae</i>, <i>Meliaceae</i>, <i>Myristicaceae</i> and <i>Myrtaceae</i> families. The forest is continuous for several kilometres around the crane except for an area 300&nbsp;m due east of the crane, which is regrowth forest. Annual average rainfall at the site is around 5180&nbsp;mm and is strongly seasonal, with 66% falling between January and April (wet season). Mean daily temperature ranges from 26.6&nbsp;°C in February to 21.2&nbsp;°C in July. </br> <br> Tropical cyclones are a frequent occurrence in Far North Queensland. These severe tropical storm systems are natural phenomena which play a major role in determining the ecology of Queensland's tropical lowland rainforests. In March 1999 Tropical Cyclone Rona (Category 3) passed over the Cape Tribulation area causing widespread damage (gusts >170&nbsp;km/h). At the site several large trees fell, nearly all of the remaining trees were stripped of leaves and the lianas towers were torn to ground level. </br> <br> The flux station was mounted at the 45&nbsp;m level on the tower of the Australian Canopy Crane external link. The canopy crane is a Liebherr 91 EC, freestanding construction tower crane. The crane is 48.5&nbsp;m tall with a radius of 55&nbsp;m enabling access to 1 hectare of rainforest. Fluxes of heat, water vapour and carbon dioxide were measured using the open-path eddy covariance technique. Supplementary measurements above the canopy included temperature, humidity, rainfall, total solar; these measurements have continued post the flux system decommissioning. Heat flux, soil temperature and water content (time domain reflectometry) were measured in proximity to the flux station; these measurements have continued post the flux system decommissioning. Detailed biometric measurements are made at the crane site and all trees have regular (5 yearly) dbh measurements and canopy mapping carried out. Monitoring bores (3) are located on site. Leaf litter measurements are carried out on a monthly basis.

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br />The Cape Tribulation flux station was located in the land that is adjacent to the Daintree National Park which is part of the Wet Tropics World Heritage Area (WTWHA). The site is flanked to the west by coastal ranges rising to more than 1400m and to the east by the Coral Sea. The red clay loam podzolic soils are of metamorphic origin and have good drainage characteristics. The metamorphic rocks grade into granite boulders along Thompson Creek which runs along the northern boundary of the site. The crane site itself is gently sloping but the fetch area makes the site one of very complex terrain. The forest is classed as complex mesophyll vine forest (type 1a) and has an average canopy height of 25m. The dominant canopy trees belong to the Apocynaceae, Arecaceae, Euphorbiaceae, Lauraceae, Meliaceae, Myristicaceae and Myrtaceae families. The forest is continuous for several kilometres around the crane except for an area 300m due east of the crane, which is regrowth forest. Annual average rainfall at the site is around 5180mm and is strongly seasonal, with 66% falling between January and April (wet season). Mean daily temperature ranges from 26.6°C in February to 21.2°C in July. <br> Tropical cyclones are a frequent occurrence in Far North Queensland. These severe tropical storm systems are natural phenomena which play a major role in determining the ecology of Queensland's tropical lowland rainforests. In March 1999 Tropical Cyclone Rona (Category 3) passed over the Cape Tribulation area causing widespread damage (gusts >170km/h). At the site several large trees fell, nearly all of the remaining trees were stripped of leaves and the lianas towers were torn to ground level. <br> The flux station was mounted at the 45m level on the tower of the Australian Canopy Crane external link. The canopy crane is a Liebherr 91 EC, freestanding construction tower crane. The crane is 48.5 metres tall with a radius of 55 metres enabling access to 1 hectare of rainforest. Fluxes of heat, water vapour and carbon dioxide were measured using the open-path eddy covariance technique. Supplementary measurements above the canopy included temperature, humidity, rainfall, total solar; these measurements have continued post the flux system decommissioning. Heat flux, soil temperature and water content (time domain reflectometry) were measured in proximity to the flux station; these measurements have continued post the flux system decommissioning. Detailed biometric measurements are made at the crane site and all trees have regular (5 yearly) dbh measurements and canopy mapping carried out. Monitoring bores (3) are located on site. Leaf litter measurements are carried out on a monthly basis. <br> For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/daintree-rainforest-supersite/ .<br /><br />