This dataset includes volumetric soil water content measured across soil pits in the lowland rainforest of Cape Tribulation. Data were acquired using time-domain reflectometry (TDR) probes recording at soil surface (10 cm) and at depths (50, 100 and 150 cm) at 4 control points - PB1 and PB8 are in the SW quadrant of the crane plot, PB2 and PB5 are in the NW quadrant of the crane plot.

Data is provided from three survey types: nocturnal drive-by monitoring; ground counts; and exit counts. The nocturnal drive-by monitoring dataset provides information on species presence/absence at 124 sites across Christmas Island. The ground count dataset provides information on numbers of bats observed roosting in trees at known camp sites; while the exit count dataset records counts of bats exiting from the respective camp sites.

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br><em>Eucalyptus obliqua</em> forests dominate the vegetation below 650&nbsp;m where they exist as fire-maintained communities. On fertile soils these forests attain mature heights in excess of 55&nbsp;m: the tallest <em>E. obliqua</em> reaches a height of 90&nbsp;m. The flux station is installed in a stand of tall, mixed-aged <em>E. obliqua</em> forest (77 and >250 years-old) with a rainforest understorey and a dense man-fern (<em>Dicksonia antarctica</em>) ground-layer, on a small flat of elevation 100&nbsp;m adjacent to the Huon River. The understorey vegetation progresses from wet sclerophyll (dominated by <em>Pomaderris apatala</em> and <em>Acacia dealbata</em>) to rainforest (dominated by <em>Nothofagus cunninghamii</em>, <em>Atherosperma moschatum</em>, <em>Eucryphia lucida</em> and <em>Phyllocladus aspleniifolius</em>) with increasing time intervals between fire events. The site supports prodigous quantities of coarse woody debris as is characteristic of these fire-maintained eucalypt forests on fertile sites in southern Tasmania. The soil at the flux site is derived from Permian mudstone and has a gradational profile with a dark brown organic clayey silt topsoil overlying a yellow brown clay. The climate is classified as temperate with a mild summer and no dry season. Mean annual precipitation is 1700&nbsp;mm with a relatively uniform seasonal distribution. Summer temperatures peak in January (8.4&nbsp;°C to 19.2&nbsp;°C) with winter temperatures reaching their lowest in July (2.6&nbsp;°C to 8.4&nbsp;°C).</br> <br>The instruments are mounted at the top of an 80&nbsp;m tall guyed steel lattice tower. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation. An open-path gas analyser (EC150) was replaced by a closed-path gas analyser (EC155) at the end of January 2015. Soil moisture content is measured using time domain reflectometry. Soil heat fluxes and temperature are also measured. Micro-meteorology (CO₂, H₂O, energy fluxes) and meteorology (temperature, humidity, wind speed and direction, rainfall) were measured from 2013 to late 2016, but the dataset is incomplete due to ongoing problems since changing the open-path IRGA to a closed path system (CPEC200) during 2015. Soil data (moisture, heat flux, temperature) are complete for the time period.</br>

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The Cow Bay flux station was established in December 2008 and managed by James Cook University. The forest is classified as complex mesophyll vine forest, there are 94 species in the core 1Ha, and average tree height is 22m. Elevation of the site is 90m and mean annual precipitation is 3935mm. The Daintree Rainforest is one of the most biodiverse forests in Australia.The instruments are mounted on a walk-up tourist tower at 35m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.The early years 2009 - 12 had several data gaps. Shadowing of the radiometric equipment continues to cause artifacts on the radiometers - these can be seen as reduction in downwelling radiation with solar inclination. The site is part of the FNQ Rainforest SuperSite - associated with the Daintree node, which is part of the TERN Australian SuperSite Network (ASN). <br/> For additional site information, see https://supersites.tern.org.au/supersites/fnqr-daintree .<br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The ecosystem was dominated by <em>Eucalyptus tectifica</em> and <em>Planchonia careya</em>.</br> <br>Elevation of the site was close to 90&nbsp;m and mean annual precipitation at a nearby Bureau of Meteorology site was 1730&nbsp;mm. Maximum temperatures ranged from 31.4&nbsp;°C (in June) to 36.8&nbsp;°C (in October) while minimum temperatures range from 16.2&nbsp;°C (in July) to 25.1&nbsp;°C (in December). Maximum temperature varied seasonally by approximately 5.4&nbsp;°C and minimum temperatures varied by approximately 8.9&nbsp;°C. The instrument mast was 15&nbsp;m tall. Heat, water vapour and carbon dioxide measurements were taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation were measured above the canopy. Soil heat fluxes are measured and soil moisture content was gathered using time domain reflectometry.</br>

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /><br /> This is a topographically flat area, primarily comprised of the following soil types: sandy loams, scattered clays, red brown earths, transitional red brown earth, sands over clay and deep sands. Stream valleys and layered soil and sedimentary materials are found across the landscape. <br /><br /> The flux station tower extends to 20m, however flux measurements are recorded from slightly lower than this. Mean annual precipitation from a nearby Bureau of Meteorology site measured 465 mm. Maximum temperatures ranged from 37.4°C (in January) to 16.6°C (in July), while minimum temperatures ranged from 29.0°C (in January) to 11.8°C (in July). Maximum temperatures varied on a seasonal basis by approximately 20.8°C and minimum temperatures by 17.2°C. <br /> The site is within a wider research area (60 x 60 km) that supports a network of flux stations, which have been in operation since late 2001 onwards.<br /><br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br />The flux station site is located within an area of dryland agriculture. The surrounding area is dominated by broadacre farming practices. The vegetation cover is predominantly pasture. Elevation of the site is close to 152m and mean annual precipitation at a nearby Bureau of Meteorology site measures 650mm. Maximum temperatures range from 12.3°C (in July) to 29.7°C (in February), while minimum temperatures range from 10.4°C (in July) to 26.8°C (in February).<br /><br />The instrument mast is 4 meters tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall and net radiation are measured. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.<br /><br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The site is classified as an open woodland savanna. The overstory is co-dominated by tree species <em>Eucalyptus miniata</em> and <em>Eucalyptus tentrodonata</em>, and average tree height is 14–16m. Elevation of the site is close to 64m and mean annual precipitation is 1750mm. Maximum temperatures range from 30.4°C (in July) to 33.2°C (in November), while minimum temperatures range from 19.3°C (in July) to 25.4°C (in November). Therefore, the maximum and minimum range varies from 7°C (wet season) to 11°C (dry season). <br /><br /> The instrument mast is 23m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation are measured above the canopy. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.<br /><br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Silver Plains Flux Station was established in 2019 in Interlaken, on the Tasmanian Central Plateau, on land owned and managed by the Tasmanian Land Conservancy.</br>

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br /> The Gingin site was established in June 2011 by CSIRO and is now managed by Edith Cowan University Centre for Ecosystem Management. The site is a natural woodland of high species diversity. The overstorey is dominated by Banksia spp. mainly B. menziesii, B. attenuata, and B. grandis with a height of around 7m and leaf area index of about 0.8. There are occasional stands of eucalypts and acacia that reach to 10m and have a denser foliage cover. There are many former wetlands dotted around the woodland, most of which were inundated all winter and some had permanent water 30 years ago. The watertable has now fallen below the base of these systems and they are disconnected and are no longer permanently wet. The fine sediments, sometimes diatomaceous, hold water and they have perched watertables each winter. There is a natural progression of species accompanying this process as they gradually become more dominated by more xeric species. The soils are mainly Podosol sands, with low moisture holding capacity. Field capacity typically about 8 to 10%, and in summer these generally hold less than 2% moisture. The water tabl is at about 8.5 m below the surface, and a WA Dept of water long-term monitoring piezometer is near the base of the tower. The instrument mast is 14m tall, with the eddy covariance instruments mounted at 14.8m. Fluxes of carbon dioxide, water vapour and heat are quantified with open-path eddy covariance instrumentation. Ancillary measurements include temperature, air humidity, wind speed and direction, precipitation, incoming and outgoing shortwave radiation, incoming and outgoing long wave radiation, incoming total and diffuse PAR and reflected PAR. Soil water content and temperature are measured at six soil depths. Surface soil heat fluxes are also measured. A COSMOS Cosmic ray soil moisture instrument is installed, along with a logged piezometer, and nested piezometers installed with short screens for groundwater profile sampling. To monitor the watertable gradient, piezometers will be installed 500 m esat and west of the tower. <br/> For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/gingin-banksia-woodland-supersite/. <br /><br />