Bulk Density
Type of resources
Topics
Keywords
Contact for the resource
Provided by
Years
Update frequencies
status
-
<p>This is Version 1 of the Australian Soil Bulk Density - Whole Earth product of the Soil and Landscape Grid of Australia. It is superseded by: <a href="../../../metadata/TERN/95978aec-6ba8-446b-a721-2b875d9f61a8" target="_blank" rel="noopener">Soil and Landscape Grid National Soil Attribute Maps - Bulk Density - Whole Earth - Release 2</a>.</p> <p>The Soil and Landscape Grid of Australia has produced a range of digital soil attribute products. Each product contains six digital soil attribute maps, and their upper and lower confidence limits, representing the soil attribute at six depths: 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm and 100-200cm. These depths are consistent with the specifications of the GlobalSoilMap.net project (http://www.globalsoilmap.net/). The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels). These maps are generated by combining the best available Digital Soil Mapping (DSM) products available across Australia. Attribute Definition: Bulk Density of the whole soil (including coarse fragments) in mass per unit volume by a method equivalent to the core method; Units: g/cm3; Period (temporal coverage; approximately): 1950-2013; Spatial resolution: 3 arc seconds (approx 90m); Total number of gridded maps for this attribute: 18; Number of pixels with coverage per layer: 2007M (49200 * 40800); Total size before compression: about 8GB; Total size after compression: about 4GB; Data license : Creative Commons Attribution 4.0 (CC BY); Variance explained (cross-validation): 0.4%; Target data standard: GlobalSoilMap specifications; Format: GeoTIFF.</p>
-
This is Version 2 of the Australian Soil Bulk Density - Whole Earth product of the Soil and Landscape Grid of Australia.<br></br> It supersedes the Release 1 product that can be found at <a href="https://doi.org/10.4225/08/546EE212B0048">https://doi.org/10.4225/08/546EE212B0048</a><br></br> The map gives a modelled estimate of the spatial distribution of Bulk Density in soils across Australia.<br></br> <p>The Soil and Landscape Grid of Australia has produced a range of digital soil attribute products. Each product contains six digital soil attribute maps, and their upper and lower confidence limits, representing the soil attribute at six depths: 0-5 cm, 5-15 cm, 15-30 cm, 30-60 cm, 60-100 cm and 100-200 cm. These depths are consistent with the specifications of the GlobalSoilMap.net project - <a href="https://esoil.io/TERNLandscapes/Public/Pages/SLGA/Resources/GlobalSoilMap_specifications_december_2015_2.pdf">GlobalSoilMaps</a>. The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels).<br></br> Detailed information about the Soil and Landscape Grid of Australia can be found at - <a href="https://esoil.io/TERNLandscapes/Public/Pages/SLGA/index.html">SLGA</a><br><br> <ul style="list-style-type: disc;"><li>Attribute Definition: Bulk Density of the whole soil (including coarse fragments) in mass per unit volume by a method equivalent to the core method;</li> <li>Units: g/cm3;</li> <li>Period (temporal coverage; approximately): 1950-2021;</li> <li>Spatial resolution: 3 arc seconds (approx 90 m);</li> <li>Total number of gridded maps for this attribute: 18;</li> <li>Number of pixels with coverage per layer: 2007M (49200 * 40800);</li> <li>Data license : Creative Commons Attribution 4.0 (CC BY);</li> <li>Target data standard: GlobalSoilMap specifications;</li> <li>Format: Cloud Optimised GeoTIFF.</li></ul>
-
These are the soil attribute products of the Tasmanian Soil Attribute Grids. There are 8 soil attribute products available from the TERN Soil Facility. Each soil attribute product is a collection of 6 depth slices. Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the Specifications of the GlobalSoilMap. Attributes: pH - Water (pHw); Electical Conductivity dS/m (ECD); Clay % (CLY); Sand % (SND); Silt % (SLT); Bulk Density - Whole Earth Mg/m3 (BDw); Organic Carbon % (SOC); Coarse Fragments >2mm (CFG). These products were developed using datasets held by the Tasmanian Department of Primary Industries Parks Water & Environment (DPIPWE) Soils Database. The mapping was made by using spatial modelling and digital soil mapping (DSM) techniques to produce a fine resolution 3 arc-second grid of soil attribute values and their uncertainties, across all of Tasmania. Note: Previous versions of this collection contained a Depth layer. This has been removed as the units do not comply with Global Soil Map specifications.
-
These products are derived from disaggregation of legacy soil mapping in the agricultural zone of South Australia using the DSMART tool (Odgers et al. 2014a); produced for the Soil and Landscape Grid of Australia Facility. There are 10 soil attribute products available from the Soil Facility: Available Water Capacity (AWC); Bulk Density - Whole Earth (BDw); Cation Exchange Capacity (CEC); Clay (CLY); Coarse Fragments (CFG); Electrical Conductivity (ECD); Organic Carbon (SOC); pH - CaCl2( pHc); Sand (SND); Silt (SLT). Each soil attribute product is a collection of 6 depth slices (except for effective depth and total depth). Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the specifications of the GlobalSoilMap. The DSMART tool was used in a downscaling process to translate legacy soil landscape mapping to 3” resolution (approx. 100m cell size) raster predictions of soil classes and corresponding soil properties. Legacy mapping was performed at 1:50,000 and 1:100,000 scales to delineate associated soils within polygons however individual soils were not explicitly spatially defined. These new disaggregated map products aim to incorporate expert soil surveyor knowledge embodied in legacy polygon soil maps, while providing re-interpreted soil spatial information at a scale that is more suited to on-ground decision making. Note: The DSMART-derived dissagregated legacy soil mapping products provide different spatial predictions of soil properties to the national TERN Soil Grid products derived by Cubist (data mining) kriging based on site data by Viscarra Rossel et al. (2014). Where they overlap, the national prediction layers and DSMART products can be considered complementary predictions. They will offer varying spatial reliability (/ uncertainty) depending on the availability of representative site data (for national predictions) and the scale and expertise of legacy mapping. The national predictions and DSMART disaggregated layers have also been merged as a means to present the best available (lowest statistical uncertainty) data from both products (Clifford et al. 2014). Previous versions of this collection contained Depths layers. These have been removed as the units do not comply with Global Soil Map specifications.
-
These are products of the Soil and Landscape Grid of Australia Facility generated through disaggregation of the Western Australian soil mapping. There are 9 soil attribute products available from the Soil Facility: Available Water Holding Capacity - Volumetric (AWC); Bulk Density - Whole Earth (BDw); Bulk Density - Fine Earth (BDf); Clay (CLY); Course Fragments (CFG); Electrical Conductivity (ECD); pH Water (pHw); Sand (SND); Silt (SLT). Each soil attribute product is a collection of 6 depth slices. Each depth raster has an upper and lower uncertainty limit raster associated with it. The depths provided are 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm & 100-200cm, consistent with the Specifications of the GlobalSoilMap. The DSMART tool (Odgers et al. 2014) tool was used in a downscaling process to translate legacy soil landscape mapping to 3” resolution (approx. 100m cell size) raster predictions of soil classes (Holmes et al. Submitted). The soil class maps were then used to produce corresponding soil property surfaces using the PROPR tool (Odgers et al. 2015; Odgers et al. Submitted). Legacy mapping was compiled for the state of WA from surveys ranging in map scale from 1:20,000 to 1:2,000,000 (Schoknecht et al., 2004). The polygons are attributed with the soils and proportions of soils within polygons however individual soils were not explicitly spatially defined. These new disaggregated map products aim to incorporate expert soil surveyor knowledge embodied in legacy polygon soil maps, while providing re-interpreted soil spatial information at a scale that is more suited to on-ground decision making. Note: The DSMART-derived dissagregated legacy soil mapping products provide different spatial predictions of soil properties to the national TERN Soil Grid products derived by Cubist (data mining) and kriging based on site data by Viscarra Rossel et al. (Submitted). Where they overlap, the national prediction layers and DSMART products can be considered complementary predictions. They will offer varying spatial reliability (/ uncertainty) depending on the availability of representative site data (for national predictions) and the scale and expertise of legacy mapping. The national predictions and DSMART disaggregated layers have also been merged as a means to present the best available (lowest statistical uncertainty) data from both products (Clifford et al. In Prep). Previous versions of this collection contained Depths layers. These have been removed as the units do not comply with Global Soil Map specifications.
-
The Soil Facility produced a range of digital soil attribute products. Each product contains six digital soil attribute maps, and their upper and lower confidence limits, representing the soil attribute at six depths: 0-5cm, 5-15cm, 15-30cm, 30-60cm, 60-100cm and 100-200cm. These depths are consistent with the specifications of the GlobalSoilMap.net project (http://www.globalsoilmap.net/). The digital soil attribute maps are in raster format at a resolution of 3 arc sec (~90 x 90 m pixels). Attributes included: Available Water Capacity; Bulk Density - Whole Earth; Clay; Effective Cation Exchange Capacity; pH - CaCl2; Silt; Sand; Total Nitrogen; Total Phosphorus. Period (temporal coverage; approximately): 1950-2013; Spatial resolution: 3 arc seconds (approx 90m); Total number of gridded maps for this attribute: 18; Number of pixels with coverage per layer: 2007M (49200 * 40800); Total size before compression: about 8GB; Total size after compression: about 4GB; Data license : Creative Commons Attribution 3.0 (CC By); Target data standard: GlobalSoilMap specifications; Format: GeoTIFF.